Gas Separation Equipment Leaf Separator Decontamination

Introduction of cyclone separator equipment :

The main function of the cyclone separator equipment is to remove the solid particles and droplets carried in the conveyed gas as far as possible, to achieve gas-solid-liquid separation, to ensure the normal operation of the pipeline and equipment, in the west-east gas transmission project, the cyclone separator is a more important equipment. Industrial applications of cyclones generally fall into four broad categories: control of air pollution, process equipment, as pre-separator units, and removal of liquid cargoes from gases. As a process equipment, it is also often used in conjunction with other drying, cooling, and grinding systems. It can also be used as a receiver for material products in pneumatic conveying systems. It has the characteristics of simple structure, convenient operation, low price and high efficiency.

Features of Leaf Separator :

First, gravitational settlement

1. Advantages and disadvantages of gravity settlement.

Advantages:

(1) Simple design;

(2) The equipment is simple to make;

(3) Low resistance.

Second, baffle separation

1. Advantages and disadvantages of baffle separation

Advantages:

(1) The separation efficiency is high in gravity settlement;

(2) The volume gravity settlement is reduced a lot, so the baffle separation structure can be used in high pressure vessels;

(3) Stable work.

Application of Leaf Separator :

Purification separator: oil-water separator.

The oil-water separator is generally installed at the inlet or outlet of the compressor.

If the oil-water separator installed in the imported oil-water separator has high separation efficiency, the efficiency of the compressor will be improved, because the compressor can do useful work and useless work, if the imported gas contains less useless oil and water in the middle, the useful work increases, and the efficiency is higher, then in the long run, the reduced operating cost is far greater than the cost used to improve the oil-water separation efficiency.

If installed at the compressor outlet, the gas transmitted to the user can be purified, so that the user's operating cost is reduced or the operation is safer and more stable, and it is also significantly more cost-effective than the cost of improving the gas-liquid separation efficiency.

2. Process media separators such as: gas-liquid separators after evaporators of refrigeration systems.

Refrigeration system is the use of refrigerant liquid phase change latent heat to refrigeration, the process medium in the evaporator absorbs a lot of heat to be cooled material, so that the liquid phase into the gas phase, and then sent to the absorber or compressor, and then the generator or condenser, and from the gas phase into the liquid phase.

3. Product separators such as: ammonia separators in synthetic ammonia systems.

Since the reaction of raw gas cannot be complete each time, the generated ammonia and the unreacted raw gas are mixed together. After passing through the cooler, most of the gas ammonia becomes liquid ammonia. After passing through the separator, the raw gas continues to react after being boosted by the compressor.

The basic principle is to make use of the different specific gravity of gas and liquid, in a suddenly expanded container, after the flow rate decreases, in the process of the main body steering, the fine liquid droplets in the gas phase sink and separate from the gas, or by using a cyclone separator, the fine liquid droplets in the gas phase are thrown to the wall by the imported high-speed air flow, and lose kinetic energy after collision and separate from the steering gas.